ATR Tile Leveling Alignment System T Shape DIY Kit
For use with brick pattern, subway layout, herringbone, etc.
About 190 sq ft coverage area
Kit Includes: 100 T-Shape Spacers, 100 Edge Spacers, 100 (Re-Usable) Pre-Assembled Spindles.
Grout spacer 3/32″ (2mm) 0r 1/8 (3mm).
Tile thickness (1/4 – 3/4) (6mm-20mm) 15/64 – 51/64.
The most simple to use tile leveling system for professional tile-man and DIY`ers.
Benefits of ATR Lippage Free System:
- You only need 1 cross spacing plate for 4 tiles NOT 4 clips like other leveling systems.
- While every other system require 376 units for 100 pieces of tile ATR require only 117.
- No tools (GUN) needed! No need for expensive hand tools.
- Simple and quick to lay with only 2 elements: Spacer & Spindle.
- The only system that removed without the use of a force.
- Only System that leave clean grout line (no risk of spacers not break all the way).
- Cross Spacers (+) Shape allow for 2/3 of saving.
- Creates a lippage free surface.
- Keeps tiles in place while drying.
- Assists in aligning tiles.
- Stress free installation.
- Suitable for floors and walls.
- Suitable for indoor and outdoor uses.
- Reusable spindle.
- Australian design and Australian made.
How to use 3 Easy steps
1. Spread thinset and lay tile.
2. Screw spindle into spacing plate, slide spindle with spacing plate attached in between two tiles.
3. Tighten spindle clock wise firmly until all four corners are aligned flush. (Remove Re-usable spindle once tile adhesive is dry).
Same Day Shipping