ATR Tile Leveling System 100 Floor Only Edge Spacers 2mm
These floor only edge spacers 2mm are made to flex during earthquakes to prevent damage of tile.
ATR Tile Leveling And Alignment System Floor Only Edge Spacers 2mm 100 Unites
The floor spacing plate is a patented blade design created to flex and accommodate structural movement.
Coverage Area – The need for edge spacers in tile installation is small. check the reference chart for quantity.
Grout spacer 3/32" (2mm), Tile thickness 15/64 - 51/64 (1/4 - 3/4) (6mm-20mm).
With The ATR Leveling System You Save Money:
- You only need 1 cross spacing plate for 4 tiles, NOT 4 clips like every other tile leveling system.
- On a project of 100 pieces of tile, using the ATR system you would only need a total of 117 spacers with the approximate cost of $30.00! in comparison with any other leveling system you would need 376 spacers with a cost of $44.00. This is About 33% savings in money and over 66% in time savings for labor.
- No Tools (GUN) needed! No need for expensive hand tools.
- Simple and quick to lay with only 2 elements: Spacers & Spindle.
- Cross Spacers (+) Shape allow for 2/3 of saving.
- Keeps tiles in place while drying.
- Assists in aligning tiles.
- Suitable for floors and walls.
- Suitable for indoor and outdoor uses.
- Reusable spindle.
How to use in 3 easy steps
1. Spread thinset and lay tile
2. Screw spindle into the spacing plate and slide spindle with spacing plate attached in between two tiles.
3. Tighten spindle clock wise firmly until all four corners are aligned flush. Remove re-usable spindle once tile adhesive is dry.
With the ATR you are sure to enjoy the best way to level tiles !
In stock - Same Day Shipping