A2Z Tile Leveling System 100 Re-usable Wedges
Easy to use and time saving system helps adjust the height of the tiles and evenly holds their edges throughout the curing process of the setting material. Designed for fast tile installation and reduces costly call backs by insuring that the finished floor surface is virtually lippage-free.
Thickness of tiles 6-14 mm
Space between tiles 1-1.5 mm
How to use:
1. Put the clip under two tiles and wedge into clip
2. Adjust the pliers to a proper range, press the wedge, until two tiles are at a same level.
3. After 24h, kick off the clips with foot or rubber hammer.
This is 2 parts system that requires not additional tools:
100 pieces in bag
Wedge – Green
Clip – Black
How Much do you need for your tile job:
6″x24″ tiles – 100 pieces of system will cover up to 25 sq ft.
12″x12″ tiles – 100 pieces of system will cover up to 35 sq ft.
12″x24″ tiles – 100 pieces of system will cover up to 50 sq ft.
24″x24″ tiles – 100 pieces of system will cover up to 130 sq ft.
Note: Its recommended to have 20-25% more wedges handy on job site since some jobs may required even more clips and wedges ( depending on tile quality and tile layout).