ATR Tile Leveling And Alignment System 3mm Edge Spacers

$29.95

A patented blade design created to flex and accommodate structural movement during earthquakes.

Description

ATR Tile Leveling And Alignment System 3mm Edge Spacers

100 3mm Floor only Edge Spacers 

Note: with the ATR system you would need less Edge Spacers for your tile installation.

This floor spacing plate has a patented blade design created to flex and accommodate structural movement during earthquakes to minimize tile and floor damage.

Grout spacer for 1/8″ (3mm) / Tile thickness 15/64 – 51/64 (1/4 – 3/4) (6mm-20mm)

Why ATR ?

  • With ATR You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System
  • While every other system require 376 units for 100 pieces of tile ATR require only 117

In stock – Ship Same Day

Advantages of the ATR Tile Levelers

  • No Tools (GUN) needed! No need for expensive hand tools.
  • Simple and quick to lay with only 2 elements: Spacer & Spindle.
  • The only system that removed without the use of a force
  • Only System that leave clean grout line (no risk of spacers not break all the way)
  • Cross Spacers (+) Shape allow for 2/3 of saving
  • Creates a lippage free surface
  • Keeps tiles in place while drying
  • Assists in aligning tiles
  • Stress free installation
  • Suitable for floors and walls
  • Suitable for indoor and outdoor uses
  • Reusable spindle
  • Australian design and Australian made

How to use in 3 easy steps

1. Spread thinset and lay tile
2. Screw spindle into the spacing plate and slide spindle with spacing plate attached in between two tiles.
3. Tighten spindle clock wise firmly until all four corners are aligned flush. Remove re-usable spindle once tile adhesive is dry.

In stock – Ship Same Day

This system is VERY easy to learn and use at any skill level!

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Video Demonstration