Bridjit 4-Piece Expandable Curb Ramp Set for 16 ft Driveways
Bridjit 4-Piece Expandable Curb Ramp Set, 16-Feet of Driveway Coverage
On Sale - NEW - Free ShippingA 4-piece rubber curb ramp for protection of the undercarriage of vehicles from damage when driving over rolled curbs. Great for vehicles who's front bumper is too low to clear the curb from the street to their driveway. Can be used for Corvette, Porsche, campers, low profile cars and more.
Additional 4 ft. center sections can be added as needed to accommodate the length of your driveway. 4-Set includes: 1 left section, 2 center sections, 1 right section. Also available: Standard 3 sections set for 12 ft driveways and 5 sections set for 20 ft driveways.
Will BRIDJIT Fit My Curb?
Check BRIDJIT Compatibility Criteria before ordering.
1. Measure 20” out from top edge of curb out into the street.
2. Measure from the lowest point of the gutter, perpendicular to the first measurement. This distance should be between: 1.75” TO 3”
- Bridjit curb ramps are not bolted down to the storm gutter, just bolted together, forming a 150lb. to 200lb mass, (depending on the number of sections used).
- Bridjit Curb Ramps are designed to reduce the impact of a rolled curb entry by as much as 80% and can be used to protect the undercarriage of all types of vehicles, such as cars, trucks, golf carts, motorcycles, boat trailers and can be used to facilitate the movement of wheeled carts and hand trucks.
- Easily installed with only a hammer and screwdriver; Bolt together with pre-inserted galvanized bolts to connect the sections, not to the ground. Bridjit is an easy 2 person, 15 minute installation solution, and requires no special tools.
- Neighborhood friendly! Bridjit has a built-in full length waterway allowing normal drainage. The 2-1/2-inch wide channel on the underside of each section allows water to flow under the ramp, accommodating storm runoff and tapered ends help prevent the buildup of debris.
- Galvanized bolts measure 1/2 x 7-1/2-inch and are pre-inserted into the center sections.
- Each section weighs 50 pounds and measures 2-1/2 x 48 x 16 inches (H x W x D). The 2-1/2" height at the center tapers to 3/4-inch at the top and bottom of the ramp.
- Money saving solution to replacing your driveway entry, estimated to be from $3000 to $4000.
- Can alleviate driver and passenger back pain, experienced while entering and exiting driveways.
- Sloped ends that ease vehicles up and over the ramp when parking parallel to the curb.
- Can be easily flipped out of the way for periodic cleaning.
Bridjit Curb Ramp is Eco friendly! The average American contributes 4 tires every year to our landfills. Each BRIDJIT rubber curb ramp set uses 12 passenger tires, thus helping to reduce the number of scrap tires in landfills, making it the Green solution to your jarring curb problem.
BRIDJIT curb ramps are 100% made in the USA.
A2Z Sell is an Authorized Dealer of Bridjit Curb Ramps.
low profile car ramps, Corvette ramps, car ramp extenders for low profile cars, low profile car ramps for corvette, bridjit curb ramp, bridjit coupon, curb ramp for driveway, driveway ramps on sale
Brand Bridjit Curb Ramps
Mfg Part # 013964213188